This site uses cookies to remember your language and measure which pages help. Accept all, or keep only what is necessary. Details in our Cookie Policy.

Business guides /Pricing & Negotiation

Who Owns the Tooling — and How to Make That Visible in the Contract

A mould invoice is not proof of ownership. Ownership is a document question: the clause, the tooling record, and the handover set. Two of the three are usually missing.

7 min read Reading time
November 21, 2026 Updated
Pricing & Negotiation Filed under
On this page7 sections
  1. What “ownership” actually covers
  2. The three documents that decide it
  3. What actually happens when you try to move it
  4. How to write the clause
  5. If the tool already exists
  6. Next step
  7. Related reading

Quick read · Pricing & Negotiation

A mould invoice is not proof of ownership. Ownership is a document question: what the contract says, what drawings you hold, and what the factory can physically hand over on the day you leave. Get that wrong and a second supplier cannot quote, because the tooling is not yours to move.

What “ownership” actually covers

Tooling is rarely one object. In most plastic and metal projects it is four:

  • The tool itself — cavity, core, inserts, hot runner
  • The fixtures and gauges used to check the part
  • The drawings and CAM files that let another shop cut a replacement
  • The program or the electrode set, when the part involves EDM work

Contracts frequently name the first and forget the other three. That is where the argument starts two years later.

The three documents that decide it

  1. A tooling clause in the purchase contract — states that the buyer owns the tool, that it is held for the buyer’s exclusive use, and that it is returnable on request.
  2. A tooling record — serial number, cavity count, steel grade, date of first approval, and the address where it is stored.
  3. A handover set — 2D drawings, 3D data, and a photo set of the tool as delivered.

Two of the three are usually missing. The clause without the record is unenforceable in practice, because nobody can identify which block of steel is yours.

What actually happens when you try to move it

Three predictable responses, in order of frequency: the factory says the tool was paid for by a previous order; the factory says the tool is “in production” and cannot be released this month; or the factory asks for a storage and maintenance fee before release. None of these are refusals — they are price negotiations wearing a different hat. The clause and the record are what turn them back into procedure.

How to write the clause

Keep it short and specific. It needs to cover: who owns the tool, that the tool may not be used for other customers without written consent, the storage location, the release condition (usually payment of tooling cost plus any agreed storage fee), and who bears the shipping cost on release. If the tool is amortised into the unit price instead of paid upfront, say so explicitly and state when ownership transfers.

If the tool already exists

Do not start with a legal argument. Ask for three things in writing: the tooling record, the address where it sits, and a photo of the serial plate. Most suppliers will provide them. If the record does not exist, ask them to create one now, dated and signed — it is weaker than a clause signed at the start, but it is far better than nothing.

Next step

If you are about to pay for tooling, or already have and are not sure what you hold, send the product and the current stage. We will tell you which of the three documents is missing first.

See how sourcing and tooling are handled or send the tooling details.

Related reading

Where this guide connects

This page is one entry in a category. The service behind it is where the work actually gets done.

Send a request →

Related reading

Same kind of request?

Tell us the category, quantity and target city. Scope, schedule and pricing basis reach you within 24 hours.

Submit a request
Need a price? 3 fields · reply in 1 business day
Get a quote