This site uses cookies to remember your language and measure which pages help. Accept all, or keep only what is necessary. Details in our Cookie Policy.

Furniture Sourcing in China

Residential, contract and office furniture: panel grades, hardware substitution, and the packing that decides how much arrives intact.

On this page9 sections
  1. What buyers get wrong
  2. The categories we handle
  3. Documents and certifications that matter
  4. What we check inside the plant
  5. Which belts fit which product
  6. Where the cost sits
  7. Failure modes at this stage
  8. How an engagement runs
  9. Next step

Furniture is a category where price differences are almost always structural: panel grade, hardware brand, foam density, joinery method and packing. A quote that is 25% cheaper is rarely a better negotiation — it is a different product wearing the same drawing.

What buyers get wrong

  • Approving a photo instead of a physical sample. Upholstery hand, seam alignment and edge banding do not photograph reliably.
  • Not specifying the panel grade. “MDF” covers a range of densities and formaldehyde classes with very different cost.
  • Ignoring hardware. Hinges and runners are the first substitution and the first failure in the field.
  • Budgeting packing last. Breakage in transit usually costs more than the price difference that caused it.

The categories we handle

  • Residential — sofas, beds, dining, storage, outdoor.
  • Contract and hospitality — hotel casegoods, restaurant seating, banquette.
  • Office — desks, task seating, workstations, storage walls.
  • Upholstery — fabric and leather sourcing, foam specification, frame construction.
  • Flat-pack and e-commerce furniture — where assembly instructions and packaging are part of the product.

Documents and certifications that matter

  • Formaldehyde — EN 717-1 chamber values with E1 or E0 declaration; CARB Phase 2 and TSCA Title VI for the US.
  • Strength and stability — EN 12520 and EN 12521 for domestic seating and tables, EN 16139 for contract use, EN 1728 for test methods.
  • US — BIFMA X5.1 for office seating, TB 117-2013 for upholstered furniture flammability in California.
  • Materials — fabric composition and abrasion (Martindale cycles), leather type and finish, foam density and indentation load deflection.
  • Wood sourcing — FSC or PEFC chain of custody where required by the buyer’s policy.

What we check inside the plant

  • Panel cutting and edge banding: glue line quality, corner radius, whether banding is 1 mm or 2 mm.
  • Joinery: dowel, cam and bolt patterns, and whether the drilling is CNC or by jig.
  • Foam density measured on a cut sample, not read from the label.
  • Hardware in the store: brand, model, and whether it matches the approved sample.
  • Packing line: carton board grade, corner protection, drop test records.

Which belts fit which product

  • Residential and upholstery — Foshan, with Lecong as the material market.
  • Office and contract — Guangzhou, Shenzhen and the Zhongshan cluster.
  • Outdoor and metal furniture — Taizhou and the Zhejiang coast.
  • Wooden casegoods — Shandong and Jiangsu panel belts.

Where the cost sits

On upholstery, fabric and foam are the largest lines and the frame is where corners are cut invisibly. On casegoods, panel and hardware dominate, and edge banding quality is the difference between a five-year and a two-year product. On flat-pack, packaging can reach 8–12% of landed cost, and reducing it without a drop test simply moves the cost to the claim.

Failure modes at this stage

  • Foam density below specification, which shows as sagging after six months.
  • Hardware downgraded to an unbranded equivalent with the same finish.
  • Colour mismatch between components finished in different batches or different shops.
  • Cartons that pass a warehouse drop and fail a container transload.

How an engagement runs

We specify the product in build terms rather than marketing terms: panel grade, banding thickness, foam density, hardware brand, joinery, finish and packing. Then a physical sample signed by both sides, then a pre-production meeting on the line, then inspection at 100% for the first order and AQL for repeats. For contract projects, we add a colour approval step before bulk finishing.

Next step

Send the drawing or reference product, the quantity, the destination market and the packing requirement. We will tell you where the quote is likely to be reduced and what it will cost you later. Submit a request, or read furniture sourcing.

Need a price? 3 fields · reply in 1 business day
Get a quote