This site uses cookies to remember your language and measure which pages help. Accept all, or keep only what is necessary. Details in our Cookie Policy.

Apparel & Fabric

Cutting, first article, finishing and final inspection: the four gates that decide whether a garment order ships as approved.

On this page8 sections
  1. What makes apparel different
  2. Where to source it
  3. How we screen an apparel supplier
  4. What to inspect
  5. What moves the price
  6. Common failures
  7. Next step
  8. Related

Apparel is the category where small orders are normal and consistency is the whole problem. Colour, shrinkage and stitch quality decide whether the second order is a repeat or a dispute.

What makes apparel different

  • Small orders are viable. A few hundred pieces is a normal run, which makes it the right category for testing a design before committing.
  • Colour is a physical standard, not a number. A Pantone reference helps, but dye lots differ and lab dips must be approved against a physical swatch.
  • Shrinkage is decided before cutting. Fabric that has not been pre-shrunk will change size after the first wash, and no amount of inspection fixes that.

Where to source it

Guangzhou for apparel, leather and wholesale — Shisanhang and Baima for the markets, Zengcheng and Huadu for the plants. Dongguan (Humen) for a second apparel cluster. Foshan where fabric meets furniture.

The markets are for testing; the factories are for producing. Treating a market stall as a production partner is how a second order fails.

How we screen an apparel supplier

  1. Lab dip and bulk approval. Who approves the colour, against what physical standard, and what happens when the bulk does not match.
  2. Shrinkage testing. Pre-shrunk fabric, with a test result rather than a promise.
  3. Stitch density and seam strength on the actual production sample, not the salesman sample.
  4. Batch consistency. Ask for three shipments of the same SKU and compare them.
  5. Capacity honesty. A stall quoting 50,000 pieces a month is quoting someone else’s capacity.

What to inspect

Measurement against the size spec on a sample of pieces, colour against the approved swatch under daylight, stitching at stress points, and the trim and label accuracy — a wrong care label is a customs problem, not a cosmetic one.

What moves the price

Fabric quality, stitch density, trim quality, and order quantity. The gap between a cheap and an expensive garment of the same design is almost always in the fabric and the seams.

Common failures

  • Bulk colour that does not match the approved lab dip.
  • Shrinkage after the first wash, because the fabric was not pre-shrunk.
  • A salesman sample sewn by a skilled hand and a production run sewn by a line.
  • Wrong care or content labels for the destination market.

Next step

Send the design, the target quantity and the fabric. We will tell you whether to start with the markets or go straight to a factory.

Factory sourcing · Guangzhou · Trade fairs · Quality inspection

Related

Restricted substances and repeat-order consistency:

Need a price? 3 fields · reply in 1 business day
Get a quote